Inspection, Oil Level Gearbox Axis 2 - ABB IRB 7600 - 500/2.55 Product Manual

3 Maintenance

3.3.2. Inspection, oil level gearbox axis 2

3.3.2. Inspection, oil level gearbox axis 2
Different designs
The cover of gearbox axis 2 is made in different designs, with different locations of the oil
plug hole for filling. The oil plug hole of the later design is located 33 mm below the original
placement. The measured distance to the oil level varies, depending on the design of the
cover.
Oil plug, early design
The axis 2 gearbox is located in the lower arm rotational center. The figure below shows the
early design of the gearbox cover.
xx0300000068
A
B
C
D
138
Gearbox, axis 2 (behind motor attachment not shown in figure )
Oil plug, filling (early design)
Oil plug, draining
Label, specifies the type of oil in axis 2 gearbox
Continues on next page
3HAC022033-001 Revision: E