Repair; Introduction - ABB IRB 7600 - 500/2.55 Product Manual

4 Repair

4.1. Introduction

Structure of this chapter
This chapter details all repair activities recommended for the robot and any external units of
the robot.
It is made up of separate procedures, each detailing a specific repair activity. Each procedure
contains all information required to perform the activity, for example spare parts numbers,
required special tools and materials.
The procedures are gathered in sections, divided according to the component location on the
robot.
Required equipment
All equipment required to perform a specific repair activity is listed together with the current
procedure.
The equipment is also gathered in different lists in the
The equipment is also gathered in different lists in the chapter Reference information.
Safety information
Before any service work is commenced, it is extremely important that all safety information
is observed!
There are general safety aspects that must be read through, as well as more specific safety
information that describe danger and safety risks when performing specific steps in a
procedure. Make sure to read through the chapter
service work.
3HAC022033-001 Revision: E
4.1. Introduction
Product manual, reference
Safety on page 15 before commencing any
4 Repair
information.
215