Table of Contents
Advertisement
2 Installation and commissioning
2.5.11. Installation of cooling fan for motors, axes 1-3 (option)
Continued
Cooling fan
The details of the cooling fan are shown in the figure below.
xx0500002158
A
B
C
D
Required equipment
Equipment
Cooling fan
Cabling, position switches
and cooling fans, axes 1, 2
and 3
Cabling, cooling fans, axes
1 or 2.
Plate for customer
connections
Additional cabling to and
inside the controller
Material set fan axes 1 and
2
94
Fanbox
Attachment screws, fanbox plates (9 pcs)
Groove in the connector
Tightening screws, fanbox (3 pcs)
Art. no.
3HAC15374-1
3HAC15390-1
3HAC023599-001
3HAC025778-001
-
3HAC023999-001
Note
Choose this cabling if equipping the robot
withboth position switches and cooling
fansor with cooling fans on axis 3.
Choose this cabling if only equipping the
robot with cooling fans on axis 1 or 2 (not
on axis 3and not with position switches).
An additional connection plate must be
fitted to the robot base, if not already
installed. The plate is shown in the figure
Plate for customer connections, at base
on page
95.
Specified in section
Position switch and
fan cables, robot base to controller
(option) on page
120.
Continues on next page
3HAC022033-001 Revision: E
Advertisement
Table of Contents
