dummyhead
dummyhead
CKP SENSOR INSPECTION
Remove the ECM (page 10-5).
Disconnect the CKP sensor 2P connector
Measure the resistance between the CKP sensor 2P
connector sensor side No. 1 (Blue) and No.2 (White)
terminals.
Resistance:1,850 – 2,450 Ω
CMP SENSOR INSPECTION
CMP 1 SENSOR PEAK VOLTAGE
Remove the throttle body (page 5-71).
Disconnect the CMP sensor 4P connector
Measure the resistance between the CMP 1 sensor No.
1 (Green) and No. 2 (Red) terminals of the sensor side.
Resistance:1,850 – 2,450 Ω
[1].
[2]
CRKP
(Blue)
[1].
[1]
TDC1P
(Green)
FUEL SYSTEM
[1]
CRKM
(White)
TDC1M
(Red)
5-123