Water Jacket Removal; Installation - TOHATSU BFT250A Service Manual

dummyhead dummyhead
COOLING SYSTEM

WATER JACKET REMOVAL/

INSTALLATION

REMOVAL
Remove the engine assembly (page 13-4).
Remove the following:
– Bolts (8 x 100 mm) [1] (two)
– Bolts (8 x 30 mm) [2] (four)
– Bolts (6 x 121 mm) [3] (six)
– Bolts (6 x 40 mm) [4] (two)
Remove the L./R. water jacket covers [5], two cover
packings [6] and L./R. exhaust guides [7] from the
mount case [8].
Remove the two exhaust guide seals [9], two O-rings
[10] and two exhaust guide seals B [11] from the L./R.
exhaust guides.
[11]
[7]
[10]
[9]
11-6
[5]
[6]
[2]
[4]
[1]
[5]
[4]
[3]
[3]
[11]
[7]
[10]
[6]
[9]
[8]
[2]
[1]