TOHATSU BFT250A Service Manual page 380

dummyhead dummyhead
CYLINDER HEAD
INSTALLATION
Install the timing belt tensioner pulley [1] and loosely
tighten the timing belt tensioner bolt [2].
Install the return spring [3] as shown.
Push the tensioner pulley in the direction shown [4], and
then tighten the tensioner bolt.
Install idler pulley A [1] and tighten the idler pulley A bolt
[2] to the specified torque.
TORQUE: 83 N·m (8.5 kgf·m, 61 lbf·ft)
Install idler pulley B [3] and tighten the idler pulley B bolt
[4] to the specified torque.
TORQUE: 39 N·m (4.0 kgf·m, 29 lbf·ft)
Install the caps [5] on the pulleys.
Check that the cap groove is installed securely.
14-12
[2]
[3]
[5]
[2]
[1]
[1]
[3]
[4]
[4]
[3]