TOHATSU BFT250A Service Manual page 202

dummyhead dummyhead
FUEL SYSTEM
Remove the bolt (6 x 14 mm) [1] and release harness
clip A [2] from the fuel pipe [3].
Remove the two bolts (6 x 35 mm) [4].
Remove the fuel pipe from the injector base by pulling
the fuel joint hose [5] from the air vent hose [6] on the
back side of the vapor separator.
Remove the bolt (6 x 25 mm) [1] and disconnect the fuel
joint hose [2].
Disconnect the fuel pipe joint [3], and then remove the
O-rings [4].
5-80
[2]
[1]
[4]
[3]
[4]
[1]
[3]
[6]
[5]
[3]
[2]