TOHATSU BFT250A Service Manual page 274

dummyhead dummyhead
CHARGING SYSTEM
Remove the four screw/washers (4 x 7 mm) [1], rectifier
[2], and seal ring [3].
Remove the four nuts [1], insulators [2], and the rear
housing [3].
Remove the washer [4].
Remove the rotor [1] from the stator (drive end housing)
[2].
7-8
[1]
[3]
[2]
[2]
[1]
[3]
[4]
[1]
[2]