Oil Filler Extension Removal; Installation; Oil Level Gauge Cover Removal; Removal/Installation - TOHATSU BFT250A Service Manual

dummyhead dummyhead

OIL FILLER EXTENSION REMOVAL/

INSTALLATION

Remove the two bolts (6 x 22 mm) [1] and the oil filler
extension [2].
Apply liquid gasket (Threebond
HT, Hondabond 4, or equivalent) to the shaded part
shown.
Install the oil filler extension and tighten the two bolts (6
x 22 mm).

OIL LEVEL GAUGE COVER REMOVAL/

INSTALLATION
Remove the R. exhaust manifold (page 5-95).
Remove the oil level gauge.
Remove the four bolts (6 x 18 mm) [1], oil level gauge
cover [2], and O-ring [3].
Install a new O-ring onto the oil level gauge cover.
Install the oil level gauge cover and tighten the four
bolts (6 x 18 mm).
Install the oil level gauge.
Install the R. exhaust manifold (page 5-96).
® #1141H, Hondabond
[2]
[1]
LUBRICATION SYSTEM
[2]
[1]
[3]
12-5