Service Information
4. Pre-delivery Inspection
1) Steering Handle
å Check installations for clattering and play.
∫ Adjust steering friction.
ç Check throttle grip for movement. (Fully Open/Fully
Close).
∂ Adjust throttle friction.
2) Gear Shift
Check that shift lever 1 moves from neutral (N) to forward
1.
(F)and reverse (R) smoothly.
3) Engine Oil
1.
Set outboard motor upright.
2.
Fill with Engine Oil.
4 Stroke Engine Oil :
OIL
450 mL (15.2 fl.oz)
Use oil level gauge 1 to check oil quantity.
3.
Engine oil is removed before shipment to
prevent leakage during transportation.
When checking the oil level, screw in the oil level
gauge fully.
4) Gear Oil
1.
Check quantity of gear oil.
Gear Oil :
OIL
195 mL (6.6 fl.oz)
Fill with gear oil until some of the oil spills out of
the plug hole when the upper oil plug is removed.
1-8
CAUTION
å
ç
a
b
1 Steering Adjust Screw
N
(R)
1
1 Oil Level Gauge
2
3
2 Upper limit 3 Lower limit
1 Oil Plug 2 Gasket
Do not reuse.
∫
c
1
d
∂
d
c
c Heavier d Lighter
R
N
(F)
F
1
4st
4st OIL
2 1
4st 4/5/6 2020