TOHATSU BFT250A Service Manual page 556

dummyhead dummyhead
MOUNT
MOUNT CASE REMOVAL/
INSTALLATION
Remove the engine (page 13-4).
Remove the seven bolts (6 x 20 mm) [1], mount rubber
cover [2] and mount rubber cover seal [3].
Hold the two bolts (12 x 200 mm) [4] and remove the
two upper rubber mount nuts [5].
Remove the mount case [6] from the swivel case/stern
bracket [7]
Replace a mount rubber cover seal with new one.
Installation is in the reverse order of removal.
TORQUE:
Upper rubber mount nut:
83 N·m (8.5 kgf·m, 61 lbf·ft)
18-4
[2]
[7]
[4]
[1]
[3]
[5]
[6]