TOHATSU BFT250A Service Manual page 517

dummyhead dummyhead
SHIFT ROD REMOVAL/INSTALLATION
REMOVAL
Remove the water pump (page 11-9).
Wrap a shop towel [1] around the shift rod spline, and
use pliers to turn the shift rod [2] in the direction shown
(Cutout of the shift rod spindle [3] is toward the right
side of the cruising direction [4]).
Remove the shift rod [1] and shift rod holder [2] from the
gear case.
Remove the two water seals (12 x 21 x 6 mm) [1] from
the shift rod holder [2] using a commercially available oil
seal remover.
Remove the O-ring [3] from the shift rod holder.
GEAR CASE (COUNTER ROTATION)
[2]
[3]
[4]
Viewed from the upper side:
[1]
[1]
[2]
[2]
[1]
[2]
[3]
17-13