Exhaust Manifold Anode Removal - TOHATSU BFT250A Service Manual

dummyhead dummyhead
Connect the water return tube [1] and water tube [2] to
the exhaust manifold.
Connect the water relief tube [1] to the exhaust manifold
[2].
Connect the EMT sensor 2P connector [3].
Install the following:
– HO2S 4P connector (L. side only: page 10-6)
– engine cover bracket (page 6-9)
EXHAUST MANIFOLD ANODE
REMOVAL/INSTALLATION
Remove the exhaust manifold (page 5-95).
Remove the screw [1] and anode metal [2].
Installation is in the reverse order of removal.
[1]
[2]
[1]
[2]
[2]
FUEL SYSTEM
[3]
[1]
5-97