TOHATSU BFT250A Service Manual page 478

dummyhead dummyhead
GEAR CASE (STANDARD ROTATION)
With the groove [1] on the clutch shifter [2] toward the
forward bevel gear, assemble the clutch shifter on the
propeller shaft while aligning the shifter pin installation
hole [3] with the long hole [4] in the propeller shaft.
• The forward bevel gear is the cruising direction side
[5].
Install the shifter pin [1] while aligning the hole [2] in the
clutch shifter [3] with the hole [4] in the shift slider [5].
Install the cross pin ring [1] on the clutch shifter [2].
• Check that the coils of the cross pin ring do not
overlap each other.
16-24
[2]
[5]
[1]
[1]
[3] [2]
[1]
[4]
[2]
[2]
[4]
[5]
[3]
[1]