TOHATSU BFT250A Service Manual page 332

dummyhead dummyhead
COOLING SYSTEM
Remove the bolt (6 x 16 mm) [1] and water pump
housing [2].
Remove the water pump housing O-ring [3], O-ring
(65.4 x 2.4 mm) [4] and two dowel pins [5].
Remove the gear case grommet [6] and rubber setting
plate [7] from the gear case.
Remove the two water seals (26 x 42 x 7 mm) [1] using
a commercially available oil seal remover.
11-10
[5] [1]
[2]
[3]
[4]
[6]
[7]
[1]