TOHATSU BFT250A Service Manual page 377

dummyhead dummyhead
Disconnect the CMP sensor 4P connector [1].
Using the special tool as shown, loosen the timing belt
driven pulley bolt [1].
TOOL:
Lock nut wrench, 56 mm [2]
Remove the timing belt driven pulley bolt [1], timing belt
driven pulley [2], and key [3] from the camshaft.
Remove the two special bolts (8 x 29 mm) [4] and
timing belt back cover [5] from the cylinder head.
07LPA-ZV30200
CYLINDER HEAD
[1]
[1]
[2]
[3]
[2]
[1]
[4]
[5]
14-9