Pre-Delivery Inspection; Steer Ng Hand E; Gear Sh Ft And Thrott E - TOHATSU MD 30B2 Service Manual

4. Pre-delivery Inspection

1) Steering Handle
Check installation of drag link.
2) Gear Shift and Throttle
Remote Control Model
Shift into forward (F), back to neutral (N) and then shift into
reverse (R) to check that the shift operations are smooth.
Then, set the lever to position a to check that the throttle
operations are smooth.
Rotate propeller to ensure shifting while engine is
not running.
Tiller Handle Model
Shift into forward (F), back to neutral (N) and then shift into
reverse (R) to check that the shift operations are smooth.
Turn the throttle grip full close to full open position to check
that the throttle operations are smooth.
TLD D30/40/50B2 2013
N
a
1
a
1-9