Maintenance
1. Inspection Schedule
Description
Fuel filter
Piping/Hoses
Fuel tank
Spark plug
Starter motor
Battery
Engine oil
Oil filter
Compression pressure
Combustion chamber
Valve clearance
Timing belt
Thermostat
Propeller
Gear oil
Water pump
Power trim & tilt
Warning system
Bolts and Nuts
Sliding and Rotating Parts.
Grease Nipples
Anode
Shift cable/
Throttle cable
3-2
Inspection intervals
First 20
Every 50
Every 100
Every 200
hours of 1
hours of 3
hours of 6
hours of 1
month
months
months
Replace
Replace
Replace
Replace
Replace
Replace
Replace
Inspection procedure
year
Check and clean or Replace
if necessary.
Check and clean or Replace
if necessary.
Clean
Remove carbon deposits or
Replace if necessary.
Check for salt deposits and
the battery cable condition.
Check installation, fluid
quantity, gravity.
Replace
Replace every 200 hrs or 1
year.
Check every 200 hrs or 1
year.
Clean every 200 hrs or 2
years.
Check and adjust
Check and Replace if
necessary.
Check and Replace if
necessary.
Check for bent blades,
damage, wear.
Change or replenish-oil and
check for water leaks.
Check for wear or damage.
Replace every 1year.
Check & replenish oil,
manually operate.
Check function
Retighten
Apply and pump in grease.
Check for corrosion and
deformation.
Check for operation and
damage.
Remarks
0.7 to 0.8 mm
(0.028 to 0.032 in)
Oil filter replaced :
2.4 L (2.5 US qt.)
Oil filter not replaced :
2.2 L (2.3 US qt.)
Replace oil filter
cartridge.
Include valve lapping if
necessary.
IN: 0.20 to 0.25 mm
(0.008 to 0.010 in)
EX: 0.30 to 0.35 mm
(0.012 to 0.014 in)
Hypoid gear oil
(GL5, SAE#80-90) 500 ml
Replace if necessary.
4st 60 2019