Tool; Cylinder Head - TOHATSU BFT250A Service Manual

dummyhead dummyhead
Disconnect the water tubes [1] from the exhaust
manifolds.
Disconnect the cylinder head cover oil return hoses [1]
and air vent tube [2].
Attach the engine chains [1] to the engine hanger [2].

TOOL:

Engine hanger [3]
Remove the cap [1], two mount case flange nuts [2],
two flange bolts (10 x 55 mm) [3], and two flange bolts
(12 x 95 mm) [4] from the engine assembly.
• Be sure that the hanger chains are hooked on the
three engine hangers securely.
ENGINE REMOVAL/INSTALLATION
[1]
VSB02C000021
[3]
[1]
[2]
[2]
[4] [1]
[2]
[1]
[3]
[1]
[3]
13-5