Tools - TOHATSU BFT250A Service Manual

dummyhead dummyhead
Item
Engine oil leak
Each operation part
Engine condition (4)
Power trim/tilt
Shift control cable
*1: Cylinder sleeve water jacket
*2: Exhaust manifold
*3: Cylinder block
1. Lubricate more frequently when used in salt water.
2. For professional commercial use, log hours of operation to determine proper maintenance intervals.
3. When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after each use.
4. Upon starting, check for unusual engine sounds and cooling water flowing freely from the check hole.
5. When there is 1/3 or more consumption, please exchange.
6. Check the fuel line for leaks, cracks, or damage. If it is leaking, cracked, or damaged, take it to your servicing dealer for
replacement before using your outboard.
7. Check the fuel line for leaks, cracks, or damage. Replace the fuel line if there are signs of leaks, cracks, or damage.

TOOLS

LIST
Oil filter wrench, 65 mm
07HAA-PJ70101 or 07AAA-PLCA100
operating hour interval, whichever comes first.
Each After
use use
Check
Check
Check
Check
Check-
adjust
Belt tension gauge
07TGG-001000A or 07JGG-001010A
REGULAR SERVICE PERIOD (2)
Perform at every indicated month or
First Every 6
month months
or 20 or 100
hrs. hrs.
MAINTENANCE
Every Every
Every
2 6
year
years years
or
or or
200
400 1,200
hrs.
hrs. hrs.
Valve adjust wrench, 10 mm
07908-5900000
Refer
to
page
–
–
–
3-33
3-33
3-3