TOHATSU BFT250A Service Manual page 473

dummyhead dummyhead
SHIFT SLIDER/PROPELLER SHAFT
REMOVAL/INSTALLATION
SHIFT SLIDER REMOVAL
Remove the propeller shaft holder (page 16-18).
Remove the cross pin ring [1] and the shifter pin [2], and
then remove the clutch shifter [3].
Remove the shift slider [1] and the two steel balls (#7)
[2] from the propeller shaft [3]. Take care not to lose the
steel balls.
Remove the circlip [1] from the shift slider [2].
Remove the roller [1] from the shift slider [2] using a
commercially available pin driver [3].
GEAR CASE (STANDARD ROTATION)
[2]
[3]
[1]
[3]
[2]
[3]
[2]
[1]
[2]
[1]
[1]
16-19