TOHATSU BFT250A Service Manual page 209

dummyhead dummyhead
Release the wire harness from the clamp [1] of the fuel
pump.
Disconnect the fuel pump (high pressure side) 2P
connector [2] and release the connector from the
connector holder of the fuel pump.
Disconnect the vacuum tubes [1] from the vacuum tank
of the vapor separator.
Remove the bolt (6 x 25 mm) [1] and disconnect fuel
hose A [2] from the vapor separator.
Remove the O-ring [3].
Release the tube clamps [1] and disconnect the
pressure regulator return hose [2].
[2]
[1]
[2]
FUEL SYSTEM
[1]
[2]
[1]
[3]
[1]
5-87