TOHATSU BFT250A Service Manual page 199

dummyhead dummyhead
Connect the vacuum tube [1] to the IAB control
diaphragm [2].
Install the engine cover bracket [1] and washer (8 mm)
[2], and then tighten the bolt (8 x 35 mm) [3] and bolt (6
x 12 mm) [4] securely.
Install the fuel pipe [5] to the clamps [6].
Install the washer (8 mm) [1], bolt (8 x 35 mm) [2], bolt
(6 x 12 mm) [3] and tighten them securely.
Clamp the cover locking cable [4] to the clamp [5].
Tighten the air flow clamp screw [1] securely.
[2]
[1] [6]
[2]/[3]
[3]
[1]/[2]
[1]
FUEL SYSTEM
[1]
[5] [4]
[4] [5]
5-77