TOHATSU BFT250A Service Manual page 293

dummyhead dummyhead
Remove the two screws (6 x 22 mm) [1] and the two O-
rings [2].
Remove the starter magnetic switch [3], spring [4], and
the plunger [5].
Remove the two bolt screws [1] and remove the yoke/
rear bracket [2].
Remove the packing [3] and plate [4].
Remove the yoke [1] from the armature/rear bracket
assembly [2].
STARTING SYSTEM
[3]
[2]
[1]
[1]
[2]
[2]
[4]
[5]
[3]
[4]
[1]
9-7