TOHATSU BFT250A Service Manual page 189

dummyhead dummyhead
FUEL PUMP (LOW PRESSURE SIDE)
REMOVAL/INSTALLATION
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when
handling fuel.
• Keep heat, sparks, and flame away.
• Wipe up spills immediately.
• Handle fuel only outdoors.
Remove the intake manifold (page 5-72).
Set a commercially available fuel tube clamp to fuel
tube D.
FUEL PUMP (LOW PRESSURE SIDE)
V TUBE (3.5 x 6.5 x 350 mm)
FUEL DRAIN
SCREW
BOLT
(8 x 32 mm)
1.5 N·m (0.15 kgf·m,
1.1 lbf·ft)
O-RING
BOLT (8 x 45 mm)
O-RING (37 x 2.4 mm)
WIRE
HARNESS CLIP
WASHER
(8 mm)
TUBE CLIP B12 (2)
FUEL DRAIN VALVE
TUBE CLIP B8
FUEL TUBE G
FUEL SYSTEM
FUEL TUBE C
FUEL TUBE
CLAMP
FUEL TUBE D
5-67