TOHATSU BFT250A Service Manual page 195

dummyhead dummyhead
Loosen the air flow clamp screw [1].
Release the cover locking cable [1] from the clamp [2].
Remove the bolt (8 x 35 mm) [3], washer (8 mm) [4],
and bolt (6 x 12 mm) [5].
Release the fuel pipe [1] from the clamps [2].
Remove the bolt (8 x 35 mm) [3], washer (8 mm) [4],
bolt (6 x 12 mm) [5], and engine cover bracket [6].
Disconnect the vacuum tube [1] from the IAB control
diaphragm [2].
[1]
[5]
[3]/[4]
[6] [2]
[3]/[4] [1]
[2]
FUEL SYSTEM
[1] [2]
[5]
[1]
5-73