TOHATSU BFT250A Service Manual page 201

dummyhead dummyhead
Disconnect the fuel return hose [1] and vacuum hose [2]
from the pressure regulator [3].
Remove the bolt (6 x 25 mm) [1] and disconnect fuel
hose A [2].
Disconnect the fuel pipe joint [3], and then remove the
O-rings [4].
Remove the bolt (6 x 25 mm) [1] and disconnect the fuel
joint hose [2].
Disconnect the fuel pipe joint [3], and then remove the
O-rings [4].
Remove the bolt (6 x 14 mm) [5] and release harness
clip A [6] from the fuel pipe.
Remove the two bolts (6 x 35 mm) [7] and fuel pipe [8].
[2]
[3]
[3]
[2]
[3]
[1]
FUEL SYSTEM
[1]
[1]
[2]
[4]
[8]
[7]
[5]
[6]
[4]
5-79