dummyhead
dummyhead
ASSEMBLY
If the front bearing is removed, replace with a new
bearing [1].
Apply grease to a new bearing outer surface.
Install a new front bearing in the stator (drive end
housing) using the special tool as shown.
TOOLS:
Driver [2]
Attachment, 52 x 55 mm [3]
Pilot, 17 mm [4]
Install the front bearing retainer [1] and tighten the four
screws (4.5 x 19 mm) [2].
07749-0010000
07746-0010400
07746-0040400
CHARGING SYSTEM
[3]
[4]
[1]
[2]
[1]
[2]
7-11