TOHATSU BFT250A Service Manual page 379

dummyhead dummyhead
EXPLODED VIEW
Degrease, clean and/or lubricate the parts marked with
*1 according
LUBRICATION instructions. Do not lubricate any part
unless instructed to do so on page 14-14.
TIMING BELT
COVER BOLT (4)
TIMING BELT DRIVEN
PULLEY BOLT
(12 x 35 mm) (2)
90 N·m (9.2 kgf·m, 66 lbf·ft)
R. TIMING BELT
DRIVEN PULLEY
IDLER PULLEY A
SPECIAL KEY (2)
TIMING BELT
TIMING BELT TENSIONER
BOLT (10 x 43 mm)
39 N·m (4.0 kgf·m, 29 lbf·ft)
TIMING BELT
TENSIONER PULLEY
TIMING BELT
BACK COVER (2)
RETURN SPRING
to the DEGREASING/CLEANING/
TIMING BELT COVER (2)
CAPS
*1
TIMING BELT IDLER PULLEY A BOLT
83 N·m (8.5 kgf·m, 61 lbf·ft)
L. TIMING BELT
DRIVEN PULLEY
CAP
IDLER PULLEY B
SPECIAL BOLT
(8 x 29 mm) (4)
BOLT (6 x 16 mm)
CKP SENSOR
TIMING BELT DRIVE PULLEY
TIMING GUIDE PLATE
CYLINDER HEAD
BOLT (6 x 16 mm) (4)
COOLING FAN
CRANKSHAFT
PULLEY BOLT (16 x 49 mm)
245 N·m (25.0 kgf·m, 181 lbf·ft)
*1
CRANKSHAFT PULLEY
TIMING BELT IDLER
PULLEY B BOLT
(10 x 64 mm)
39 N·m (4.0 kgf·m, 29 lbf·ft)
KEY (4.5 x 38.5 mm)
14-11