TOHATSU BFT250A Service Manual page 212

dummyhead dummyhead
FUEL SYSTEM
INSTALLATION
Connect the water inlet tube [1] and water outlet tube
[2] to the vapor separator [3].
Connect the air vent tube [4] in its original position as
marked during disconnection [5].
Connect the air vent tube [1] to the joint pipe [2].
Install the vapor separator [1] and loosely tighten the
two bolts (8 x 35 mm) [2] and bolt/washer (8 x 35 mm)
[3].
Connect the fuel tube E [4] to the vapor separator.
Connect the fuel return hose [1] and clamp the return
hose to the hose clamps [2].
5-90
[2]
[1]
[1]
[4]
[2]
[1]
[4]
[5]
[3]
[2]
[3]
[1]
[2]