Fuel Injectors/Fuel Pressure Regulator - TOHATSU BFT250A Service Manual

dummyhead dummyhead
FUEL SYSTEM
Connect the IAC valve 2P connector [1] and TP sensor
3P connector [2].
Connect the throttle cables [1] to the throttle cam [2].
Connect the pressure regulator vacuum hose [3] to the
intake manifold [4].
Connect the MAP sensor 3P connector [5] and clamp it
to the harness clip [6].
Connect the IAT sensor 2P connector [7].
Adjust the throttle cables (page 3-11).
FUEL INJECTORS/FUEL PRESSURE
REGULATOR REMOVAL/
INSTALLATION
REMOVAL
Disconnect the battery cable from the battery negative
(–) terminal.
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when
handling fuel.
• Keep heat, sparks, and flame away.
• Wipe up spills immediately.
• Handle fuel only outdoors.
Relieve the fuel pressure (page 5-66).
• Always disconnect the fuel hose before removing
the fuel rail.
Remove the intake manifold (page 5-72).
Release the main harness [1] from the clamp [2].
Disconnect the 2P connectors [3] to the fuel injectors.
5-78
[1]
[1]
[2] [5] [4]
[2]
[3]
[1]
[2]
[6]
[7]
[3]
[3]