TOHATSU BFT250A Service Manual page 576

dummyhead dummyhead
TRIM/TILT
Remove the spring pins using a commercially available
pin punch [1].
Remove the two tilt stoppers [1], two tilt arm bushings
[2] and the tilting bracket [3].
Check the tilt arm bushing for wear and damage.
Replace if necessary.
Remove the bolt (6 x 14 mm) [4], click spring [5] and
assist spring [6].
19-14
[1]
[1]
[2]
[3]
[4]
[5]
[6]