TOHATSU BFT250A Service Manual page 193

dummyhead dummyhead
THROTTLE BODY REMOVAL/
INSTALLATION/CLEANING
REMOVAL/INSTALLATION
Remove the cooling fan cover (page 5-68).
• When assembling, route the throttle cables and
crankcase breather hose properly (page 2-19).
• After assembly, adjust the throttle cables (page 3-11).
TP SENSOR
3P CONNECTOR
IAC VALVE
2P CONNECTOR
THROTTLE BODY SPACER
Throttle body tightening procedure:
1
3
IAT SENSOR 2P CONNECTOR
CRANKCASE BREATHER HOSE
INTAKE MANIFOLD
DOWEL PIN (2)
4
2
INTAKE MANIFOLD O-RING
GASKET
THROTTLE BODY
FUEL SYSTEM
THROTTLE CABLE B
THROTTLE CABLE A
SCREW/WASHER
(5 x 14 mm) (2)
IDLE ADJUSTING
SCREW
BOLT (8 x 65 mm) (4)
22 N·m (2.2 kgf·m, 16 lbf·ft)
5-71