dummyhead
dummyhead
ENGINE COVER/COVER LOCK
DAMPER HOOK ADJUSTMENT
Adjust height of the damper [1] hook to be 18.0 – 19.0
mm (0.71 – 0.75 in) by tightening the nuts, and adjust
for an even clearance between the engine cover and
the undercover.
UNDER COVER SEAL B
REPLACEMENT
Remove the extension case [1]:
– Standard rotation type (page 16-11)
– Counter rotation type (page 17-9)
Remove the under cover seal B [2].
Check the under cover seal B for cracks and other
damage. Replace if necessary.
Clean the under cover seal B area.
Install the under cover seal B.
6-16
[1]
18.0 –19.0 mm
(0.71 – 0.75 in)
[1]
Cruising
direction
[2]