TOHATSU BFT250A Service Manual page 273

dummyhead dummyhead
Remove the nut [1] from the alternator B terminal and
remove the insulator bushing [2].
Remove the three nuts [3], screw (5 x 8 mm) [4], and
plate [5].
Remove the rear end cover [1].
Remove the brush holder insulator [2].
Remove the two screws (4 x 6 mm) [3] and the brush
holder [4].
Remove the two screw/washers (4 x 25 mm) [1], screw
(4 x 6 mm) [2], and IC regulator [3].
CHARGING SYSTEM
[2] [3]
[1]
[3]
[1]
[5] [4]
[1]
[2]
[4]
[2]
[3]
7-7