TOHATSU BFT250A Service Manual page 198

dummyhead dummyhead
FUEL SYSTEM
INSTALLATION
Install a new intake manifold gasket [1] and the intake
manifold spacer [2] to the stud bolts [3].
Install the intake manifold [1] to the studs and cooling
fan cover grommet; do not turn the grommet inside out.
Be sure not to pinch the vacuum tube and fuel tube.
Install the seven bolts (8 x 50 mm) [2], bolt (6 x 32 mm)
[3], two nuts (8 mm) [4], and tighten them in two or three
steps.
Install the intake manifold upper cover [1] and tighten
the bolts (6 x 22 mm) [2] in the numbered order. Be
sure to tighten them in two or three steps.
5-76
[3]
[4]
7
5
1
4
10
8
[1] [3]
[2]
7
3
1
5
9
[1]
[2]
[2]
9
3
2
6
[4]
[1]
10
6
2
4
8