TOHATSU BFT250A Service Manual page 574

dummyhead dummyhead
TRIM/TILT
Mark the mount frame [1] so that punch mark [2] aligns
with the " " mark [3] on the lower mount center housing
[4].
Pull the lower mount center housing from the mount
frame using an 8-inch 2-jaw puller (commercially
available) [5] and special tools.
TOOL:
Lower mount puller adapter [6]
Puller adapter [7]
Warm up the lower mount center housing using a heat
gun (ETB1600: commercially available) if it is difficult to
remove.
Wear gloves to protect your hands when handling the
lower mount center housing.
19-12
07APB-ZY3A200
07APF-ZY3A200
[3]
[4]
[7]
[2]
[1]
[1]
[5]
[6]