TOHATSU BFT250A Service Manual page 484

dummyhead dummyhead
GEAR CASE (STANDARD ROTATION)
BEARING HOLDER DISASSEMBLY/
ASSEMBLY
DISASSEMBLY
Attach a commercially available universal bearing puller
[1] between the bearing holder [2] and the reverse bevel
gear [3].
Remove the reverse bevel gear/bearing [4] from the
bearing holder using the special tools and hydraulic
press as shown.
TOOLS:
Driver [5]
Oil seal driver attachment,
72 mm [6]
Remove the reverse bevel gear shim [6] from the
bearing holder.
Attach a commercially available universal bearing puller
[1] between the reverse bevel gear and the bearing.
Remove the ball bearing [2] from the reverse bevel gear
using the special tools and hydraulic press as shown.
TOOLS:
Driver [3]
Fork seal driver attachment,
27.2 mm [4]
Attachment, 37 x 40 mm [5]
Pilot, 25 mm [6]
EXPLODED VIEW
16-30
07749-0010000
07947-6340201
07749-0010000
07747-0010300
07746-0010200
07746-0040600
REVERSE BEVEL GEAR
REVERSE BEVEL
GEAR SHIM
BEARING HOLDER
[5]
[6]
[1]
[4]
[3]
[1]
[6]
[4]
BALL BEARING
(55 x 100 x 21 mm)
[2]
[3]
[5]
[2]