TOHATSU BFT250A Service Manual page 526

dummyhead dummyhead
GEAR CASE (COUNTER ROTATION)
Apply gear oil to the thrust bearing F [1] and install it to
the propeller shaft [2].
Install the propeller shaft on the propeller shaft holder
[3].
Apply gear oil to the thrust bearing (50 x 72 x 4.5 mm)
[4] and install it to the propeller shaft.
Apply marine grease to the thrust bearing (85 x 110 x 4
mm) [1] to avoid falling from the forward bevel gear [2].
Install the thrust shim [3], thrust bearing washer (85 x
110 x 2 mm) [4], thrust bearing (85 x 110 x 4 mm) and
forward bevel gear to the bearing holder [5].
Install the thrust bearing washer (48 x 74 x 3 mm) [6] to
the bearing holder.
17-22
[2]
[3]
[1]
[1]
[5]
[6]
[3]
[4]
[2]
[4]