TOHATSU BFT250A Service Manual page 419

dummyhead dummyhead
EXPLODED VIEW
Remove oil from the mating surface between the
crankshaft and the flywheel, and the mating surface
between the flywheel and the flywheel boss, using a
degreasing cleaning agent before installing the flywheel
and the flywheel boss.
FLYWHEEL (Degrease)
FLYWHEEL BOSS
(Degrease)
FLYWHEEL BOSS BOLT (8 mm) (8)
32 N·m (3.3 kgf·m, 24 lbf·ft)
CRANKSHAFT (Degrease)
DOWEL PIN (14 x 15 mm)
BOLT (12 mm) (8)
118 N·m (12.0 kgf·m, 87 lbf·ft)
CYLINDER BLOCK
DOWEL PIN (6 x 10 mm)
15-5