TOHATSU BFT250A Service Manual page 367

dummyhead dummyhead
Connect the cylinder head cover oil return hoses [1] and
air vent tube [2].
Connect the water tubes [1] to the exhaust manifolds.
Connect fuel tube G [1] to the fuel pump (low pressure
side) [2].
Install fuel tube G to the hose clip [3].
Connect fuel tube A [1] and B [2] to the fuel strainer [3].
Install the fuel strainer to the strainer bracket [4].
Install fuel tube A from the hose clamp [5].
ENGINE REMOVAL/INSTALLATION
[2]
[1]
[2]
[3]
[4]
[2]
[1]
[1]
[3] [1]
[5]
13-11