Hitachi Compute Blade 2000 User Manual page 147

# Item
7 Hardware Memory Dump
8 LID On
9 LID Off
10 LED Status
In the following cases, power-on requests are

ignored and the server blade is not powered on.
Power-on is disabled due to failure in the
(1)
server blade.
The number of power supply modules
(2)
installed is not enough for the installed
server blades.
To prevent the EFI firmware storage from being

corrupted, power-off requests issued during EFI
firmware update are ignored and the server blade
is not powered off. The EFI firmware update
process is executed during the first EFI boot after
the EFI firmware image is uploaded to the server
blade.
Description
blade, Spare Channel Mode cannot be used.
Performs hardware memory dump of the server
blade.
Turns on LID (Location ID Lamp).
Turns off LID (Location ID Lamp).
Shows the state of the LEDs on the front panel
of the server blade.
Location ID Lamp (LID)
POWER Lamp (PWR)
Alarm Lamp (ALM)
Condition Lamp (CND)
For the color and description of each LED, see
"Standard Server Blade (X55A1/X55A2)" in
Chapter 2.
96