Hitachi Compute Blade 2000 User Manual page 152

 LP setup
You can enable and disable the LPAR manager boot and set the LPAR manager
firmware to be used for the LPAR MANAGER boot on this screen. See
manager boot settings
 Server Configuration and Reduction
This screen displays information of the CPUs and mezzanine cards installed in the
server blade, and also displays the reduction information on the CPUs and DIMMs.
Reduction information includes whether components are deconfigured due to a
failure. You can also set up the planned reduction for the CPUs and DIMMs on this
screen.
in "Initial Settings with Server Blade Web Console".
101
LPAR