Show Environment - Dell Z9500 Command Reference Manual

show environment

View system component status (for example, temperature or power).
Z9500
Syntax
show environment [fan | pem | thermal-sensors | all]
Parameters
fan
pem
thermal-
sensors
all
Default Display status information on all system components.
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
7.8.1.0
7.6.1.0
Usage The following examples show sample output of the show environment
Information
command.
Examples
Dell#show environment pem
--
146
Enter the keyword all to display status information only on
the fan units.
Enter the keyword all to display status information only on
the power supplies and power usage.
Enter the keyword all to display only temperatures and
thresholds for the system and switching core, and port
modules.
Enter the keyword all to display status information on all
components.
EXEC
EXEC Privildge
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
The output of the show environment fan command for
the S-Series is changed to display fan speeds instead of
showing the fan status as up or down.
Introduced for the S-Series. S-Series options and output
differ from the C-Series/E-Series version.
Power Supplies --
Control and Monitoring