Table of Contents
Advertisement
VISM and VISM-PR—3.0 Specifications
VISM Card Specifications
•
•
VISM Card Physical Interface Specifications and Applicable
Standards
Physical Layer Interface T1:
•
•
•
•
•
•
•
•
Physical Layer Interface E1:
•
•
•
•
•
•
•
•
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
ATM layer: Per ITU standards I.361 and ATM UNI v3.1
AAL layer: AAL5 as per standard I.363.
Line Rate: 1.544 Mbps +/– 50 bps.
Line Interface Connector: Balanced 100-ohm RJ-48C.
Synchronization: The transmit clock can be selected from either the looped clock or the node's
clock.
Line Code: Bipolar 8 zero substitution (B8ZS) per ANSI T1.408 and AMI.
Line Framing: Extended Superframe Format (ESF 24-frame multiframe) per ANSI T1.408.
Input Jitter Tolerance: Per ATT TR 62411.
Output Jitter Generation: Per ATT TR 62411 using normal mode synchronization.
Physical Layer Alarms: LOS, LOF, AIS, RAI.
Line Rate: 2.048 Mbps +/- 50 bps.
Line Interface Connector: Balanced 120-ohm RJ-48C, Unbalanced 75-ohm SMB.
Synchronization: The transmit clock can be selected from either the looped clock or the node's
clock.
Line Code: HDB3 (E1) and AMI.
Line Framing: 16-frame multiframe per G.704.
Input Jitter Tolerance: As specified in ITU G.823 for 2.048 Mbps.
Output Jitter Generation: As specified in ITU G.823 for 2.048 Mbps.
Physical Layer Alarms: LOS, LOF, AIS, RAI.
A P P E N D I X
Cisco VISM Installation and Configuration Guide
B
B-1
Advertisement
Table of Contents
