Table of Contents
Advertisement
Chapter 5
CLI Commands
dspvbdpol
To display the VISM card level voiceband data (VBD) policies for fax/modem upspeed connection
admission control (CAC) failure and fax/modem carrier loss for calls, use the dspvbdpol command in
the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the VISM card level VBD policies are displayed:
dspvbdpol
Carrier Loss Policy:
CAC Rejection Policy:
Related Commands
Command
cnfvbdpol
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspvbdpol
Description
Configures VISM card level VBD policies.
upspeedCodec
maintain
Cisco VISM Installation and Configuration Guide
dspvbdpol
5-453
Advertisement
Table of Contents
