Table of Contents
Advertisement
Chapter 5
CLI Commands
deldnip
To delete a statistically provisioned IP address of a domain name, use the deldnip command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
resol-num
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
You cannot delete IP addresses that use external resolution of the domain name. You should not delete
the last IP address of a given domain name if it is used as one of the following:
•
•
•
•
Examples
The following example shows that the IP address associated with the resolution number 46 is deleted
from a domain name:
deldnip 46
Related Commands
Command
adddn
adddnip
cnfdn
cnfdnssrvr
deldn
dspdnallips
dspdnips
dspdns
dspdnssrvr
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
deldnip resol-num
Resolution number of the domain name. It can be in the range from 1 to 88.
Media Gateway Controller (MGC)
Trivial File Transfer Protocol (TFTP) server
Domain name server (DNS)
Announcement server
Description
Adds a domain name (call agent name) and optionally configures the resolution type
of the domain name.
Adds the IP addresses for a domain name that you added by using the adddn
command.
Configures the resolution type of a specified domain name.
Designates a domain name as a DNS.
Deletes a domain name.
Displays all statistically provisioned IP addresses and externally resolved IP
addresses for all domain names configured on the current VISM card.
Displays all statistically provisioned and externally resolved IP addresses configured
for a specified domain name.
Displays the configuration data of all domain names of a call agent.
Displays the domain name of the configured DNS of the current VISM card.
Cisco VISM Installation and Configuration Guide
deldnip
5-251
Advertisement
Table of Contents
