Table of Contents
Advertisement
Chapter 5
CLI Commands
cnfannagetime
To configure the time that a nonpermanent announcement is to remain valid after it is placed into the
VISM announcement cache, use the cnfannagetime command in the VoIP switching operating mode.
Syntax Description
nonpann-age-time
Command Modes
VoIP switching
Usage Guidelines
When a nonpermanent announcement enters the announcement cache, it remains valid, as is, until the
time you select for the nonpann-age-time argument value expires. When the time expires, the
nonpermanent announcement is refreshed from the announcement file server. Requests to play a
nonpermanent announcement do not affect its age time or cause the file to be refreshed.
Examples
The following example shows that nonpermanent announcements are configured to expire two hours
after being placed into the VISM announcement cache:
cnfannagetime 120
Related Commands
Command
addannpermanent
cnfanndn
cnfannpathprefix
cnfannprefcodec
cnfannreqtimeout
delannalldynamic
delanndynamic
delannpermanent
dspannagetime
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
cnfannagetime nonpann-age-time
Nonpermanent announcement age time (defined in minutes). It can be in the
range from 0 to 65535.
Note
Description
Configures an announcement server file and associated codec type as
permanent.
Designates an announcement file server domain name.
Designates the main prefix directory TFTP path from which to retrieve
announcement files from the announcement file server.
Configures the codec type used for announcements played on unconnected
TDM endpoints.
Configures the expiration time for announcements to begin playing after the
VISM receives the announcement signal (request) from the call agent.
Deletes all announcement files and their associated codec types from the
temporary announcement files currently saved in the VISM card.
Deletes an announcement file and associated codec type from the temporary
announcement files currently saved in the VISM card.
Deletes a permanent announcement file and its associated codec type from the
announcement file server.
Displays the time that a nonpermanent announcement is to remain valid after
it is placed into the VISM announcement cache.
0 = Infinite amount of time; the nonpermanent announcement remains
valid until you replace it, if necessary.
Cisco VISM Installation and Configuration Guide
cnfannagetime
5-75
Advertisement
Table of Contents
