Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 568

dspsesgrps
dspsesgrps
To display configuration data about all Primary Rate Interface (PRI) backhaul session groups, use the
dspsesgrps command in the VoIP switching/trunking operating mode.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples The following example shows that the configuration data of the current PRI backhaul session groups is
displayed:
dspsesgrps
GrpNum
----------------------------------------------------------------------------
2
3
Related Commands Command
addsesgrp
delsesgrp
dspsesgrp
Cisco VISM Installation and Configuration Guide
5-424
dspsesgrps
SetNum State ActiveSes
1 ? 0
1 ? 0
Description
Adds a PRI backhaul session group between a VISM card and a call agent.
Deletes a PRI backhaul session group.
Displays configuration data of a PRI backhaul session group.
TotalSes Mgc SwitchFail
0 abc 0
0 svc 0
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
SwitchSuccess
0
0