Table of Contents
Advertisement
Chapter 5
CLI Commands
dspxgcpcons
To display the xGCP connection identification number, endpoint name, and call identification number
corresponding to each call agent established connection on the gateway, use the dspxgcpcons command
in the VoIP switching/trunking and switched AAL2 PVC operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the xGCP connection identification number, endpoint name, and call
identification number of each call agent established connection on the gateway are displayed:
dspxgcpcons
xGCP Connection ID
-----------------
4c5b
4c5c
Related Commands
Command
delxgcpcon
dspxgcpcids
dspxgcpendpts
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspxgcpcons
xGCP Endpoint Name
------------------
vism/T1-1/1
vism/T1-1/2
Description
Deletes an xGCP connection specified by the xGCP connection identification
number.
Displays the LCN, CID, xGCP connection ID, endpoint name, and call ID
corresponding to each call agent established AAL2 connection on the gateway.
Displays the xGCP endpoint names of all endpoints added with the addendpt
command, or the SNMP equivalent.
xGCP Call ID
------------
C0011
C0012
Cisco VISM Installation and Configuration Guide
dspxgcpcons
5-469
Advertisement
Table of Contents
